very good upgrade. very hard to install because bumper had to be removed, labor was $250

I actually ordered this almost two years ago, and then life happened, so it didn't get installed until just a few months ago. The kit itself was really easy to work with -- but my car is a royal pain to upgrade. I ended up having to take the bumper off to gain enough access to the headlights for my hands. Not the fault of the kit, though -- everything in the kit worked smoothly.

I'm loving the new lights.

Purchased a set for my low beams and could not believe how crisp, clean and clear they are. Now I am in the process of buying a set for the High beams

Put these in the wife's Subaru Outback. Headlight Revolution staff was excellent. The product works well. You do get the high beam check from oncoming vehicles 1-3 times a night driving around as they are so bright that regardless of the beam pattern when you are far enough away you look like you have high beams on. This is less of an issue in or near town where there is overhead ambient light but on a dark road that gets light travel you're gonna get the headlight check. My only complaint is that the modules are smooth and have no great way to zip tie them to anything. You have to run zip ties to the wires which puts stress on the connections. If they added a couple of welded loops like on the S-V.4s that would be awesome. All in all if the lights aren't right the company is rock solid. That's why I've spent over $1500 with them on 2 vehicles.

The product is a decent item that appears to be well made. The installed kit is a big improvement over the old halogen bulbs that were in the vehicle. It was a pricey improvement , but I wouldn't hesitate to do it again. If you are changing to a GTR HID light fixture in a Subaru Outback it is a difficult task but doable. That is a Subaru issue due to design issues and not a GTR issue.

Can't ask for any better

They need ends to plug in to the factory wiring harnesses. Just shoving a pen into the factory plug was a little iffy. You have to take the front bumper off and take out both headlights to install these, definitely not a job for a novice!

:+1::skin-tone-2:

I assured my wife I could update her halogen bulbs if she purchased the Acadia without HID headlights. I heard about these on your YouTube channel and gave a couple of phone calls to get recommendations of LED replacements. Both assistants admitted they had not tested LED nor HID lighting in the GMC Acadia but recommended HID in my projector lenses from there tests of projector units in several other vehicles that showed LEDs don't produce favorable light patterns. I bought and installed the GTR 55w 5th get units and they are head and shoulders above the stock halogens. Installation for me did not require de-pinning of the harness. I used a 1Äù bit to drill my holes plus the harness connector seems smaller on my 9012 bulb kit than those on several YouTube videos. I 100% recommend the HID units in similar vehicles, especially considering the lifetime replacement warranty.

Worked as advertised