• Home
  • /
  • GTR PWM Interface Modules

GTR PWM Interface Modules

127 Reviews
Questions?

Brand: GTR Lighting

B-WIR-GTRPWM-HR

$0.00

PRODUCT OPTIONS

PART #: 1 x GTR.H098



Easy Return

ON SALE! Get 10% off from 4/12 - 4/21!!!

DESCRIPTION

Introducing the cutting-edge PWM Harness by GTR Lighting – your ultimate solution for upgrading to LED or HID lights hassle-free. Specially designed to conquer common issues like bulb out warnings and flickering during transitions from halogen bulbs, this bespoke module boasts intelligent circuitry that guarantees seamless performance. With ease of use in mind, installation is a breeze – simply plug the module into your vehicle's headlight connector (adapter may be needed), and connect the other end to your relay harness trigger input or directly to your new HID or LED headlight system. Perfect for 35w HID setups, this module ensures optimal compatibility. Elevate your lighting experience with the GTR Lighting PWM Harness today!

FEATURES & BENEFITS

  • Smart Performance: The PWM Harness combats warnings and flickering during upgrades.
  • Customized Design: Tailored by GTR Lighting for seamless fit and operation.
  • Effortless Installation: Plug and play into your vehicle's headlight connector.
  • Optimal Compatibility: Specifically for 35w HID setups, ensuring best performance.
  • Elevated Lighting: Upgrade confidently to enjoy enhanced brightness on the road.

WHAT’S INCLUDED

  • Modules: 2x (One Pair) PWM Interface Modules

WARRANTY INFORMATION

This GTR Lighting product includes a 2 Year limited warranty, serviced and supported by the GTR Lighting team in Atlanta, GA. This warranty does not cover modifications, alterations, or misuse. For additional information, contact us.

TECHNICAL SPECIFICATIONS

  • Input/Output: Your Preference

COMPATIBILITY

  • APPLICATIONS: PWM-Based Systems such as those on newer Ram trucks, Wranglers, newer Silverados, and Ford Focus

PWM Harness: Built by GTR Lighting Specifically for systems with Pulsed Width Modulation, this bespoke module features smart internal circuitry built to combat bulb out warnings and flickering that are all too common when upgrading from a halogen bulb to LED or HID lights.

Installation: This couldn't get much easier. Just plug in the module into the vehicle headlight connector (adapter may be required) and plug the other end into your relay harness trigger input, or directly into the new HID or LED headlight system.

HID - 35w Only: When used with HID systems, this module is specifically intended for 35w applications only.

5

Found what I needed!

by -

I have a 2013 Ram 1500 and I had the canbus modules, but kept getting the warning sign on my dash. I did some research and found this PWM module. I switched the canbus module out with PWM module and the warnings went away.

5

Great product fixed my issue

by -

Great product fixed my issue with flashing leds

5

Was Necessary for Jeep Headlights

by -

I installed S-V.4 LED Headlight Bulbs in my 2015 Jeep Wrangler and I noticed that there was a slight flickering. It wasn't bad and barely visible but I could see it and it bugged me so I bought these... problem solved. No more flicker. Easy to install and no having to wire these into the headlights. They just plug inline with the headlights. Comes with all the correct connectors to plug it inline.

5

Excellent

by -

Bought cheap load resistors from eBay that didn't work. Bought the GTR ones and presto! Perfect!

4

Works Great

by

These stopped the flickering just fine, however did have two issues. First the power and ground wire were reversed at the fog light end and had to change them to get to work. Second the connector that plugged into the OEM wiring had to be shorten up a bit to get the latch to "snap" together. It wouldn't snap no matter how hard it was pushed, we even tried removing the silicone seal to see if it would help (it didn't) so we took a file to it and shortened it about 1/32" and it went together perfect. We added some dielectric grease to both connectors and everything worked perfect.

5

Interface modules

by -

I purchased the Gen 2 headlights but on my vehicle they would not pass PA state inspection because they flickered a little when turning off or dimming. These solved that problem. They were very easy to install. They also had a tab on each one which I used to attach the module to the body to keep it from rattling around and as a heat sink. Nicely made items. Recommended.

5

Works a treat!

by -

Installed in a Porsche Macan to prevent Canbus problems. Works perfectly, very nicely made and quite neat.

5

High quality

by -

High quality - I used them and found that I did not need them. It did not hurt anything. I took them off and will save them for another project I am working on. I am still very please.

5

Great!

by -

They do what they were meant to do. My headlights are also my daytime running lights. I was told the LEDs headlights would flicker without these, and with these they don't flicker. Great!! I plugged and plugged and tucked them in, inside the dust cover. Good to go.

5

2018 Ram 2500

by -

Installed these on my Ram a few weeks ago. They have worked flawlessly and fit perfectly! I would recommend this for any Ram owner

Sign up for our newsletter