The led headlights are good and bright. The issue I had with them is that they are a fraction too long to fit under the dust cover of my 2015 Chevy Colorado.
Only time will tell how dependable they are.

Install on a 2020 4Runner SR5 Premium took longer to remove the radiator cover then it did to install the lights. After installing the first, I had to check to see how the light beam level was compared to the OEM. At about 10 feet distance, the level was almost dead on and much brighter then the OEM lights. No drilling and the PWM fits into the headlight assembly with no problems.

Love the the leds lights wow!!

Picked these up for a 2017 toyota tacoma. Would definitely recommend. Easy to install, super bright, wide cornering, and great color. The only thing i felt like i had to do was lower the beam angle just a tad, they throw much further than stock, and was worried about blinding others.

I purchased these for my wife's Camry to replace her 35w HID kit. The kit was installed when the car was new and was approximately 9 years old. These LED bulbs were a direct plug and play to the factory harness compared to the hack-job I had to repair when I removed the HID kit that had been installed.

The light output was simply amazing. So much more light that the 35w HID kit (I know they were at the end of their useful life but still brighter than I remember those lights ever being). The bulbs were clocked perfectly right out of the box. The 2012 projectors (fairly new as I replaced them with Toyota factory ones a year ago) traditionally suck, especially with a lack of a dedicated ÄúhotÄù spot in the center. But these LEDs are amazing and we can actually see what's in front of us now. Since the Toyota projector doesn't form a great center hot spot, a good amount of light is distributed sideways. You should have seen all the deer we saw. Made the fog lights just about pointless.

The only compliant is that there were no instructions to be found; even when going to the supplied website referenced in the packaging. And I couldn't call as they were closed when I was installing. But it was so straight-forward, I was able to wing it without much issue.

Note of minor warning. The little control box that is in-line between the bulb and factory connector does get a little warm (108 degrees). My application provided a nice vented mounting spot on the headlamp assembly (able to make a small bridge so air could circulate around the box to keep it cool. Not sure how hot that thing would get if I had an enclosed unit with a dust cover. Doubt I would feel comfortable tucking that thing in there. Just my two cents.

Although these are very expensive bulbs, I don't regret spending the extra money. I looked at it like this, if I spend more money on higher quality safety items such as tires and brakes then why not on headlamps. Thanks for the research that went into these bulbs so that consumers could have a well built, reliable product.

Got these for my 2013 Ford Flex limited for the fog lights the left side was a breeze to put in the right side (passenger side) took a little bit of struggle to get to the housing because of the washer fluid tank is in the way... anyway these bulbs are bright af and really shocked by them! Hands down the best LED lights I have seen.

2020 Tacoma SR - low beams: Finally I can say "so long" to HID kits! These bulbs have been in use since January 2020! After two months these lights are fantastic and are no different from a Morimoto 35w, 5.5K HID kit. The install was mere minutes with two connections, done! No more warm/low light from factory halogens; now I can see down the road and I am not blinding anyone; the cut off is perfect. Yes, these are priced on the high side, but are worth it.

These bulbs are nice and bright for me to see.

Install is plug and play. Twist out old halogen bulb and twist in this new led bulb. Then just zip tie the cords to secure the driver and you are done. Clear white light that is 3-4x stock brightness for most vehicles. This is a non paid review. I am honestly impressed.

The light came well packaged and delivered in the time frame noted in the order confirmation sent. Opening the box you can see a quality product presented.
Install was a bit of a pain, but that's dependent on each application. Mine was a 2018 Chevrolet Colorado. Passenger side is difficult due to access and having to remove panels to get at the bulb. The driver's side is fully exposed and a simple change. Also, these DO NOT fit under the stock dust caps. I'll need to alter those in order to retain their function. I wasn't expecting that, I misread that they would fit. Not sure if I'd have ordered these had I known that, I may have selected another product.
Dealing with Headlight Revolution has been excellent. Great communication and follow ups when required.