HR Tested Fit and Function
2011-2018 Jeep Grand Cherokee LED Front Turn Signal UpgradeB-HRT-0122-HR
[ In Stock: 0 pieces ]
Starting at $X.XX/month with
2011-2018 Jeep Grand Cherokee LED Front Turn Signal Bulbs: Looking for upgraded LED Front Turn Signal Bulbs from a reputable brand and value the fact that we've actually tested them on your truck? Our HR Tested kits include all the right components to ensure perfect fit, function, and performance from the upgrade. At Headlight Revolution, we do 2011-2018 Jeep Grand Cherokee LED lighting upgrades better!
2011 - 2018 Jeep Grand Cherokee LED Front Turn Signal Conversion Kit:
This kit Does NOT Work With Factory LED Models. If you have Factory LED's Your Front Turn Signals are already Factory LED.
The Carbide Series of LED bulb: is one of the latest and greatest technological advancements in LED technology that you will see in automotive lighting! Using state of the art 2835 SMD LED chips to produce unparalleled light output with high-efficiency power usage! The design of the Carbide series looks like it could CUT so it's an awesome choice in applications where you can actually see the bulb in the housing and want it look impressive.
Constant Current Driver: The Carbide Series of LED bulbs from GTR Lighting are built using a state of the art Constant Current Driver inside the bulb. This allows them to be more reliable when used on vehicles that have voltage fluctuations due to electrical system design or fault. A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage/current reaches the LED. This helps the LED bulb last longer than bulbs that don't have this device built in.
When installing: LED bulbs to replace your factory blinker bulbs, you will have a "fast flash" or "hyperflash" problem. This means the vehicle will think you have a light bulb burnt out and, as an indicator to you, will flash quicker than normal. Installing these resistors will fool your vehicle into thinking it has a light bulb in good condition installed and will blink normally. Simply wire the resistor between the ground wire and the blinking positive wire.
WARNING! The resistors get hot! It is very important to mount them to something metal behind the headlights with screws, not zip ties. The resistors get so hot they can melt some light plastic and short wires. Keep them away from all wiring and heat sensitive materials!
HR Tested: Here at Headlight Revolution, we've spent the time to install and test all HR Tested products, so we know it'll work exactly as shown and right out of the box! Not only that, but we don't favor one particular brand. We just deliver the best product for the application, period. Be sure to reference our install videos for helpful tips on making the installation process quick, painless, and clear. HR Tested: We ensure fitment and function. You do the install. For other compatible upgrades, use the Buyers Guide on our homepage!
BULBS: 2x (One Pair)
RESISTORS: 2x (One Pair)
Warranty:2 Years (Click for Details)
Jeep Grand Cherokee: 2011-2018
Housings: Designed for, and confirmed to fit, Stock Housings
LENGTH: 2.32in / 59mm
DIAMETER: 0.79in / 20mm
INTENSITY: 1200lm (raw; each)
Poor quality and poor customer service
I bought this kit with priority international shipping and they sent me poor quality lights that did not work well. They replaced only one light bulb and they sent it to me by USPS with the cheapest service, now I will have to wait a long time and pay for the installation again. I do not recommend this company or its products.
I have a 2019 Grand Cherokee and the bulbs still did fit. I have not had any issues yet and it has been 2 weeks. Replacing the amber lighting on the front makes it look real nice. When installing one of the lightbulbs the bulb came off of the power supply connector and had to use a vacuum tube to get it out. So make sure that you don't drop the bulb unless you want to try what I did or want to take the whole bumper off to get it.
turn & drl lights
still trying to figure if i have to have one of my lights on and do i have to put one on then turn them off
LED Blinker Conversion for 2017 Jeep Grand Cherokee
Absolutely fantastic upgrade! Went with the "switchback" bulbs; the white is super bright helping the HID headlight upgrade, and the switchback function works just like the installation video suggests. I soldered the resistor into place and have had no issues. Hardest part was finding a place to install the resistor where it wouldn't be in the way or make contact with something else on the vehicle. Great upgrade!!
Very easy install! Looks great
Very easy install! Looks great
The Phoenix Organization
Brutal install on 2019 Jeep Grand Cherokee Altitude , but worth the bloody knuckles because the result is awesome. These lights are a 1000x brighter than the Oem halogens. Swtich back led turn signals are an awesome look as well. Great product!!!
HID / SWITCHBACK CONVERSION KIT
The price was okay along with shipping. Packaging was great and product was intact and in good shape. Installation was a little trick due to the Grand Cherokees set up. Over all love the product and glad I got it! They also have great customer service. I had an issue with one of my ballast and they sent me a new one no questions asked. WOULD RECOMMEND!
I always switch out my bulbs, I found one I'm never going to leave. Gives front end a nice clean white look.
Led turn signal kit
Great lights. Love the look. Wasn't to bad to install and they make a world of a difference for the front end look. I definitely suggest getting these if you have a Jeep grand Cherokee. :call_me_hand: