Shop by Vehicle
LED Demon Eyes
LED Demon Eyes for Retrofit Projectors
Stock projectors go dark and lifeless the second your headlights are off, and that flat black hole is what demon eyes fix. Profile Performance builds these as either a single fixed color or a full RGB Prism setup, so you can pick a signature look or one that changes on command. Either way, the light needs a bracket and a clean wiring path to actually sit right inside the housing, which is where most people get stuck.
There is no dedicated demon eye bracket made for the Super7 housing. What actually works, confirmed through direct fitment testing, is the D2S 5.0 demon eye bracket mounted to the MLED projector, and the only modification needed is widening the bracket's screw holes. No projector mods, no drilling into the housing itself. Skip that detail and you will spend an afternoon guessing at a fix that already exists.
THE BEST RGB LED's AVAILABLE - Profile Pixel Review
Running the RGB Prism route means you also need a way to actually control the color changes, and that part is easy to overlook until the demon eyes are already mounted. The Prism RGB set also carries a blue interrupt wire: tie it to power and the demon eyes shut off when the headlights come on. If you are going RGB, plan your build around Controllers & Parts before you start wiring, not after.
Still deciding between one color and RGB? Here is the catch: RGB gives you more options later, but a single color setup is simpler to wire and just as bright day one, with 12 individual LEDs firing straight off +/- 12V and no external driver needed. That said, either style needs a home inside the projector, so I would sort out your bracket and mounting hardware at the same time you pick your demon eye, not as an afterthought once the color is already chosen.
4 Results
