Projector Retrofit Kits

Headlight Retrofit Kits Built for Real Beam Control

Most people think a headlight retrofit means dropping a new projector into your old housing and calling it done. In practice, that is the fast way to end up with a projector rattling around a housing it was never sealed for. A real projector retrofit kit bundles the projector with the harness, the hardware, and usually a shroud, because the projector alone is only one piece of a system that has to fit, wire, and aim correctly.

Matching the Kit to Your Project

If your headlight already has a projector in it and you just want more usable light, a straight projector swap is often simpler than a full retrofit. If you are opening up a reflector housing for the first time, expect some cutting, trimming, and wiring, which is exactly what these kits are built to support. So before you buy, know which situation you are actually in.

From there, decide how far you want to take the look. Some owners stop at projector plus shroud and call it finished. Others add lighting accents once the core retrofit is buttoned up, and that is where LED Halos & Strips or LED Demon Eyes come in. If you already own loose projectors and just need the supporting hardware, Controllers & Parts covers controllers, connectors, and splitters.

I would start by matching the kit to your headlight's mounting depth and your projector size preference rather than picking on looks alone, since a kit that does not physically fit is the most common reason a retrofit goes sideways. For a deeper primer on how projector optics actually control glare, Everything You Need to Know About Projector Headlights is a good next read. And if you would rather start from bare projectors and build your own combination, our Retrofit Projectors selection is the place to do it.