HR Tested Fit and Function

2014-2020 Toyota 4Runner CSP Mini LED (Low Beam)

B-HRT-0173-HR

PART #: 2 x SN.LED148


[ In Stock: 0 pieces ]

Product Details

2014-2021 Toyota 4Runner LED Low Beam Bulbs: Looking for upgraded LED Low Beam Bulbs from a reputable brand and value the fact that we've actually tested them on your truck? Our HR Tested kits include all the right components to ensure perfect fit, function, and performance from the upgrade. At Headlight Revolution, we do 2014-2021 Toyota 4Runner LED lighting upgrades better!

The GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES "CSP" style LED chips.

This LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.

Heat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.

Thermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!

Furthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES "CSP" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!

Brightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!

Want your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer Limited Lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest "CSP" style LED chipset from Philips.

Fitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.

NOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.

HR Tested: Here at Headlight Revolution, we've spent the time to install and test all HR Tested products, so we know it'll work exactly as shown and right out of the box! Not only that, but we don't favor one particular brand. We just deliver the best product for the application, period. Be sure to reference our install videos for helpful tips on making the installation process quick, painless, and clear. HR Tested: We ensure fitment and function. You do the install. For other compatible upgrades, use the Buyers Guide on our homepage!

Product Specs

  • Compatibility

  • Toyota 4Runner: 2014-2020

  • Housings: Designed for, and confirmed to fit, Stock Housings

  • Tech Specs

  • INTENSITY: 2500lm (each; raw)

  • Power: 16w (each)

  • Current: 1.17A @ 14V DC

  • INPUT VOLTAGE: 9-16V DC

  • Light Color: 6000K (Cool White)

  • WATERPROOF: IP67 Standard

Product Reviews

4.6 out of 5 stars

44 Reviews   Write a Review

5 out of 5 stars

Awesome upgrade

Gregg W

These lights were easy to install and a huge improvement over stock.


5 out of 5 stars

2019 Highlander almost smooth fit!

1985

Great interaction with HR team, they suggested this to be closet fit for my Highlander even though it's for the 4runner. I needed to trim one of the small tabs of the weather cap as the clearance is tight, but lights look great and much better than the standard halo bulbs. Thanks HR!


1 out of 5 stars

2019 4Runner

Paul Shelby

Didn't fit


5 out of 5 stars

CSP mini easy!

Sam Kliewer

Easiest LED upgrade by far. Plug and play all the way with zero cables or cords to have to worry about.


5 out of 5 stars

2019 4Runner S-V.4 PerfectFIT LED LOW BEAM

Michael Llewellyn

Have purchased S-V.4 V.3 from HR in past for other vehicles and loved them. This one, not so much. Was disappointed in the light output, even compared to stock halogen. So, called HR and exchanged for the new V.4...much, much better. Will keep this one.
One thing you need to think about and be prepared for that is not shown on HR videos, is that you will need to purchase a grommet and drill a hole in the dust cover so that the ballast sits outside the headlight housing for the V.4, but worth it.


5 out of 5 stars

Quality product

Simon Hall

The Perfectfits are great bright lights that fits perfectly. It was plug and play without having to stuff all the extra wiring into the tight headlight housing. Highly recommended.


5 out of 5 stars

Good cut off line

Andreas Gauckler

Good cut off line


5 out of 5 stars

Perfect Fit Low Beams

Mike Palmer

After replacing my stock low beams with the Perfect Fit LED's, I did a 600 mile road trip and I have to say, these lights are much better than the stock bulbs. I have a 2016 4-Runner and the stock low beams are terrible. These LED's provided a nice even light beam with a crisp top line. They're not quite as bright as I had hoped, but still, way better than stock. Also, not one person flashed me. I am happy with these LED's.


5 out of 5 stars

Awesome and Easy

John Mess

I had no idea how easy it would be and the result was amazing. I purchased the high and low beam for my 2018 4Runner and it makes a huge difference.


5 out of 5 stars

Very bright compared to Toyota OEM bulbs

STEPHEN LONG

The lights are so much brighter than the OEM lights that come on a 4runner. As many of you know the lights are dim on your newer 4runner due to the stupid projector headlight assembly. Took a little time getting the fight bulb turned so it was upright in the light so it projects properly. Finally took a marker and marked plug at top when it was locked in then turned bulb to proper position. It was so easy after the plug was marked and I get the full effect of the led light.