HR Tested Fit and Function
2014-2015 GMC Sierra Ultra HID (Low/High Beam)B-HRT-0132-HR
[ In Stock: 0 pieces ]
2014-2015 GMC Sierra HID System: Looking for upgraded HID Headlight Bulbs from a reputable brand and value the fact that we've actually tested them on your truck? Our HR Tested kits include all the right components to ensure perfect fit, function, and performance from the upgrade. At Headlight Revolution, we do 2014-2015 GMC Sierra HID lighting upgrades better!
SOLD AS A COMPLETE KIT FOR THE PROJECTOR HEADLIGHTS: - Works as low beam and high beam. The 2014 - 2015 GMC Sierra with factory projector headlights is actually a tricky vehicle to install upgrade lighting into. Not because the bulbs don't fit or the install is actually difficult, but because the vehicle uses a complex PWM/CANBUS system to monitor and control the headlight function. If you don't use an HID ballast built to integrate with this type of system you will get problems such as "bulb out" error warnings on your dash, flickering, or the headlights will just turn off! This is very common with HID headlight bulbs, and most aftermarket HID kits. Some HID kits can be made to work with an external CANBUS module of some kind, but now the GTR Lighting GEN 5 PWM/CANBUS HID conversion kit is available, and it is super bright and totally plug and play! No need for extra harnesses, no splicing wires, just plug and play. Watch our install video to see how easy it is to do the install!
The 14-15 GMC Sierra projector headlight is a cool setup: - it uses a single beam bulb (9012, 1 filament) but creates both your high and low beam patterns separately. The headlight accomplishes this by activating an internal solenoid that moves a cut off shield inside the projector. When the shield is up, you get a low beam pattern with a cut off line. When the shield is down and out of the way you get all the light and a wide flood high beam. This HID kit replaces your original halogen bulb with HID to get both high beam and low beam, 500% brighter than stock!
Super Fast Start-Up Ballast:: Are you sick of a slow ballast warm-up time? The GTR Lighting Slim PWM has an instant startup like new OEM ballasts of only 0.1s with full brightness reached at 9s.
Slim Design:: This ballast is barely larger than a stack of credit cards. 3.5" long, 2.75" wide and a half-inch tall! Mounting is easy with the supplied bracket with tape and ground strap.
NOT ALL HID KITS ARE CREATED EQUAL!: When you purchase a GTR Lighting HID conversion kit for your vehicle you're getting the best of the best in terms of wire harness, connector, bulb and ballast quality. People all over the world trust GTR Lighting for being the pinnacle in quality for HID conversion kits. Our aftermarket ballasts are built with the highest quality components designed to last for 2,500 hours of use and provide up to 5,000 Lumen of light per HID bulb! Our bulbs provide a faster-than-average warmup time, and produce less operational noise when compared to other brands.
The GTR Lighting bulbs: are constructed to be the best of the best as well. We use the best aftermarket connectors, silicone wiring, and HID bulb capsules available to create a product that just works and works well. Our bulbs have the ability to produce 30% more light than budget-brand HID bulbs found elsewhere. It's not uncommon to hear stories about how after a customer switches to a GTR Lighting HID kit it's twice as bright as their old HID kit they got from somewhere else!
PWM Integration: PWM stands for Pulse Width Modulation, it's when the vehicle flashes the input voltage to your bulbs so fast that you can't see the difference, but it modulates the activity of the halogen bulb. That's fine on an old style halogen/incandescent, but on HID systems it might make a flashing or strobing effect, or not work at all. The proprietary technology used in the GTR Lighting GEN 5 Smart System HID ballast integrates with all PWM and CANBUS vehicles for optimal functionality.
CANBUS Integration: The key component of all HID ballasts is the controller used to manage all functions including ignition, protection, and constant use. Whatever type of controller is used is what dictates the quality level of the ballast. There are two kinds of controllers used inside HID ballasts: 1. CPU Controller -or- 2. ASIC Controller
A standard CPU controller: is the most common construction type for aftermarket ballasts because it is simple, common and cheap to produce. It requires very little quality control or strict design to function, therefore it's easy for ballast makers to create low quality CPU controlHID products. It isn't very hard and it is very cheap to build. They work OK when made with high quality components but this is not often the case. A CPU controller lacks the ability to monitor the HID lamp (as the lamp power-decay changes over time) so it can cause short lifespan from overpowering, or low light output from underpowering. Generally speaking the defect rate of a CPU Controller based ballast is high, and the lifespan is shorter.
An ASIC controller: like what's used in the GTR Lighting GEN 4 ballast is what you'll find in an OEM ballast for intelligent bulb control. The ASIC-based ballast technology is sophisticated, complex and intuitive. The Hylux ASIC technology will react to the bulb response to power and increase or decrease output to keep the bulb running bright for the longest possible time. ASIC technology also allows the ballast to have a higher level of CANBUS integration for vehicles that use PWM control or adaptive lighting. It's not a 100% fix for every vehicle, but the technology is designed to be the most flexible and work with the most applications easier. HID ballasts that use Hylux ASIC technology are also more expensive to make because the components required to build this system are high quality - you can not make a cheap ASIC ballast, therefore everything about a Hylux ballast is better: Faster warmup time, less ignition noise, brighter stable operating light, less flicker-fluctuation and a longer lifespan. Simply put, the GTR Lighting HID ballasts with GEN 4 Hylux technology are the best aftermarket ballast available.
GTR Lighting HID Bulbs: Power Input Wattage: 55w High-Grade Silicone Wiring. Precisely Machined Bulb Bases: Ceramic-Insert Bulb Base for Increased Heat Resistance Precise Fitment like OEM Bulbs. Precise Xenon-Capsule Chemical Mixture for Vibrant Color Creation. HID Wire: 7.5" Adapter: 13". We use ultra high quality 100% Quartz glass to construct the main bulb component. The glass houses an OEM-grade xenon capsule using high quality halide salts from our materials supplier. Our bulbs use an OEM-inspired mounting and alignment system to keep the bulb perfectly centered where it needs to be - this is probably the most important aspect of why GTR Lighting bulbs are the best of the best. If your bulb is misaligned at all it will cause dim light output, shadows and poor beam patterns.
Compatibility: If your vehicle uses a CANBUS system to control and/or monitor the bulbs or if your vehicle uses a PWM system to control the bulbs, this GEN 5 ballast kit will be your best bet at perfect, plug and play operation. Nothing is guaranteed to work all the time because vehicle manufacturers are constantly updating the technology they use to operate and monitor the different lighting systems, but so far this new GEN 5 PWM/CANBUS ballast has integrated perfectly with everything we've tested it on, including Ram trucks, Mercedes cars, Chrylser cars, GMC trucks, and new Ford trucks.
This HID kit: uses single beam HID bulbs with a built-in adapter wiring harness. Single beam are the type of headlight or fog light bulbs that have 1 filament per bulb. If your car or truck has 2 light bulbs per headlight housing and one does low beam, the other does high beam - you've got single beam bulbs! Same goes for fog lights, nobody has ever built a car or truck with a dual beam fog light bulb.
NOTE ABOUT PROJECTORS:: Some projector-based headlights use a single beam inside the projector and use an external actuator to control a shutter inside the housing to create a high beam/low beam effect, all the while using a single beam bulb... That means it's possible to have a single beam bulb control both high and low beam but only in SOME projector headlight applications. (e.g. Dodge Ram uses a single beam bulb + a dual beam Projector. Toyota Tacoma uses a single beam bulb + a single beam projector). This kit is designed to plug into your factory headlight wiring to control the new HID bulbs and ballasts.
GTR Lighting HID bulbs: are designed to be a perfect fit replacement for any respective halogen/incandescent headlight or fog light bulb. We support the most common bulb types and some uncommon ones too! GTR Lighting HID bulbs are precisely engineered to work the best, brightest, and have the longest life time when used in conjunction with GTR Lighting HID ballasts, but they can also be used with most aftermarket HID ballasts. If you're unsure of which HID bulb style you need, please email us for assistance.
HR Tested: Here at Headlight Revolution, we've spent the time to install and test all HR Tested products, so we know it'll work exactly as shown and right out of the box! Not only that, but we don't favor one particular brand. We just deliver the best product for the application, period. Be sure to reference our install videos for helpful tips on making the installation process quick, painless, and clear. HR Tested: We ensure fitment and function. You do the install. For other compatible upgrades, use the Buyers Guide on our homepage!
BULBS: 2x (One Pair)
BALLASTS: 2x (One Pair)
Wiring: 1x Harness
Warranty:Lifetime Limited (Click for Details)
GMC Sierra: 2014-2015
Housings: Designed for, and confirmed to fit, Stock Housings
Power Input Voltage: 9-16V DC
Output Power: 35W or 55W
Input Current: 4.4A @ Startup @ 14V DC
Ignition Voltage: 23KV
Operating Temperature: -40C to +85C
Lifespan: 2,500 Hours
Ballast Dimensions: 3.5in x 2.75in x 0.5in
Cord Length: 13in
Wiring Input: Universal Female Socket (9006 Bulb Style/ P22D base)
Wiring Output: Universal AMP style,1 male,1 female
Exactly what I wanted
I have a hard time seeing at night, all I can say is WOW these HID's are awesome.
Lights work ok but I wonder about the connection?
The light out-put is much better. The problem was the installing of the connection between the truck and the actual HID light bulb. Between trying to figure out which way to flip the connection and the really struggling with the truck power cord and the light my blood pressure was rising. The two prongs ( light cord) that fit into the truck power continually pushed out the and didn't seed into the truck,light power.. After many many tries finally one worked by working over and over on those two prongs to make good connection. Continually trying to insert the light prongs caused the truck power cord to be forced away from a solid connection even though they clipped together very well.The first night my son-in-law and I watched the film quite a few times and every thing seemed to be easy when putting it together. He is an electrician (28 years) and very well versed on all of this because of his mechanical ability. Frustration started to set in probably because of my age (72). I called and contacted HR the next morning and they told me I have to do both bulbs before the lights to work. ( I don't think that is the case).. The next afternoon at about 3:30 we were at it again. Putting both installs together we had no lights on both sides. Called the company and the guy that helped quoted he has been with the company for a long time and he knew that the prong connection was probably the problem. Over and over we worked on trying to make it work with his suggestions of what to do. More frustration for both of us. Finally the drivers side bulb lit up and now after two hours we wondered about the passenger side We wondered about that extra connection wire because we didn't get it to work and he said it is not definitely needed for the install and we were concerned about that connection because we had originally tried that many times. By putting quite a bit of pressure on the back side of the female connector (truck power) holding it to be not forced out we finally got the lights to work. He was right that is a problem. If that would work well then the install would go much easier. He jokingly said he will cut the connection and wire nut it together but I didn't let him because I was going to return the whole set up. Of course we are both wondering if that connection will remain solid or rattle loose after all we are driving on the roads that do have some bumps. My biggest concern is if they know that will or might be a problem why don't they do something about it because my son-in-law says that should be able to be conquered. Plus what does that extra power cord do since I now don't have it installed but every thing is still working? HR experts tried to help and they did know this could be a problem.ON the positive side I am happy with the lights illumination. Much better than what I had. On the negative side the connection install at that one point was ver very tricky. I also noticed some radio interference after driving with the lights on . I was hoping that maybe it was just the station because some stations it didn't occur. I hope that HR stands behind all of this because I am skeptical of this set up causing more problems I was really hoping that this would solve my problem with the 2015 GMC sierra and maybe it will ?
2015 GMC Sierra
If anybody has or knows someone who owns a 2014 or 2015 GMC Sierra you will understand this review. On the first day God said let there be light, so he created Headlight Revolution and light was created !!! the difference between factory then LED's compared to the HID conversion kit I installed is like night vs day. No more stress when driving at night. Thanks guys. The only upgrade I would like to see is a adjustable headlight bulb, I had to spin the bulb to a different position to give the light projection that straight line across the top that you see on you tube. No complaining because it all worked out and i am more than satisfied but a adjustable headlight bulb would be an awesome upgrade. Keep up the good work. Thanks again
FINALLY I CAN SEE WHERE I AM GOING
Colony Construction Co.
I have a GMC Sierra with Projector headlights and for years have had to deal with minimal light to see where i was going. I was determined to fix it, first considering replacing the whole fixture with LED's. But the cost would have been well over $1,000 to do not to mention making it work. I had a burnt out bulb which now forced me to find a solution and i found a video online on the HR headlights and why they were the way to go. So i bought them and after just a few hours work and some adjustments, i now had new lights and they were as bright as my wife's car which has Zenon lights. I wish i looked into this years ago, in fact i wish GMC would look into this solution. All I can say is "Problem Solved"
2014-2015 HID sierra kit
Very easy to install if you use the supplied pig tail wires which are black. Lights are super bright now! You guys hit it on the head with this one!
Lights have a nice spread
Lights have a nice spread and distance which i love and a lot brighter then my old HIDs which i love fully recommend getting these
Still not there yet..
Read most of the reviews before purchase. Decided to buy these even though they cost quite a bit more and had a great you tube video (so I thought).
First problem no response from HR after purchase of lights ,even a 2.99 cell phone case off eBay acknowledges purchase via email.
Got the light kit delivered everything looked good and was plug and play.
Took everything apart put it together. Guess what no lights. Then I remembered another reviewer complaining about wires that clip together but are REVERSED.
Check wires , yup . Factory wires red and black. Red is hot. Light kit blue and black. Blue is hot.
Clip it in backwards I get one light on. Swap out ballasts. No light, swap out original back in I have lights, swap out new hid bulbs finally get lights working.
This is after cycling on and off truck etc.
The point is you would think that a light set that is over 100.00 more than another retailer they could at least tell you that the wiring is manufactured wrong or fix the problem. Maybe put a 1 cent piece of paper in the box stating that problem.
Also the video is outdated as the light kit is not the same.
Hopefully the lights last a long time but time will tell. They are brighter.
Hr hit it out of the park with these lights.I will tell you wasted a lot of money on other lights because of the canbus set up in the 2015 GMC Siera,plug and play for sure.
A good idea poorly executed
Ok so like the rest of you my 2014 Sierra had abysmal OEM headlights, we're talking dangerous bad. So I finally ponied up the three hundred bucks for these hoping to really knock this problem out in one felt swoop. The good news? These are bright and they do solve the problem you're trying to solve. The bad news? The harnesses are poorly built causing many issues, days of delays and lots of back and forth with support (which was very friendly but not too helpful as I was the one who found and fixed both issues I had).
So the issues I had: when connecting the "extension harnesses" (which I still don't know the purpose of, since no extending was necessary) the male pins inside the male plug would push themselves back wards through the connector causing no connection and no headlights. This happened on both left and right sides causing neither headlight to work. I went back and forth with support swapping wires here and there, swapping components from left to right, nothing worked of course. Support was just about to mail me out a whole new kit when I discovered the problem with the pins. A new kit would have caused a whole 'nother week of waiting and likely could have had the exact same issue, doh! Oh ya, another thing, the plug at one end of each extension harness was assembled backwards so that when connected to the headlight plug the female connector had no tab to lock into, it was just assembled backwards. Lets hope it doesn't wiggle out over time?
Second show stopper: once the faulty pins issue was sorted I triumphantly drove around the country square harnessing the power of the sun until I realized my passenger side light was stuck on high beam, doh again! This required more messaging of support guy and he said swap things from the right side to left side and see if the problem follows. Dang man, so do everything over again a 10th time? Nah bro. So I pulled apart the passenger side to find that due to the excessive length of that darn extension harness the mechanism that flips you from low beam to high beam was jammed and couldn't move. Gah! Easy fix at least, I just routed the extension harness differently inside the housing, but still.
So there ya go, my honest feedback, they work but the experience sucked.
Finally, BIG Lights for a BIG TRUCK!!!
This kit, along with the XB Fog lights, changed my truck into the lit-up beast it should have been!!! Excellent build quality and reasonably easy hookups! Will definitely purchase from Headlight Revolution again!!!