HR Tested Fit and Function
2014-2018 Jeep Cherokee Ultra HID (Low/High Beam)B-HRT-0156-HR
[ In Stock: 0 pieces ]
2014-2017 Jeep Cherokee HID Conversion Kit: Looking for upgraded HID Headlight Bulbs from a reputable brand and value the fact that we've actually tested them on your truck? Our HR Tested kits include all the right components to ensure perfect fit, function, and performance from the upgrade. At Headlight Revolution, we do 2014-2017 Jeep Cherokee HID lighting upgrades better!
SOLD AS A COMPLETE KIT FOR THE 2014-2017 JEEP CHEROKEE
Works as a low beam and high beam.: The 2014 - 2017 Jeep Cherokee is actually a tricky vehicle to install upgrade lighting into. Not because the bulbs don't fit or the install is actually difficult, but because the vehicle uses a complex PWM/CANBUS system to monitor and control the headlight function like many of the Dodge/Jeep/Chrysler vehicles. If you don't use an HID ballast built to integrate with this type of system you will get problems such as "bulb out" error warnings on your dash, flickering, or the headlights will just turn off! This is very common with HID headlight bulbs, and most aftermarket HID kits.
Some HID kits: can be made to work with an external CANBUS module of some kind, but now the GTR Lighting GEN 5 PWM/CANBUS HID conversion kit is available, and it is super bright and totally plug and play! No need for extra harnesses, no splicing wires, just plug and play. Watch our install video to see how easy it is to do the install!
The 14-17 Jeep Cherokee headlight: setup uses a single beam bulb (9012, 1 filament) but creates both your high and low beam patterns separately. The headlight accomplishes this by activating an internal solenoid that moves a cut off shield inside the projector. When the shield is up, you get a low beam pattern with a cut off line. When the shield is down and out of the way you get all the light and a wide flood high beam. This HID kit replaces your original halogen bulb with HID to get both high beam and low beam.
Super Fast Start-Up Ballast: Are you sick of a slow ballast warm-up time? The GTR Lighting GEN 5 has an instant startup like new OEM ballasts of only 0.1s with full brightness reached at 9s.
Slim Design: This ballast is barely larger than a stack of credit cards. 3.5" long, 2.75" wide and a half-inch tall! Mounting is easy with the supplied bracket with tape and ground strap.
NOT ALL HID KITS ARE CREATED EQUAL! When you purchase a GTR Lighting HID conversion kit for your vehicle you're getting the best of the best in terms of wire harness, connector, bulb and ballast quality. People all over the world trust GTR Lighting for being the pinnacle in quality for HID conversion kits. Our aftermarket ballasts are built with the highest quality components designed to last for 2,500 hours of use and provide up to 5,000 Lumen of light per HID bulb! Our bulbs provide a faster-than-average warmup time, and produce less operational noise when compared to other brands.
The GTR Lighting: bulbs are constructed to be the best of the best as well. We use the best aftermarket connectors, silicone wiring, and HID bulb capsules available to create a product that just works and works well. Our bulbs have the ability to produce 30% more light than budget-brand HID bulbs found elsewhere. It's not uncommon to hear stories about how after a customer switches to a GTR Lighting HID kit it's twice as bright as their old HID kit they got from somewhere else!
PWM Integration: PWM stands for Pulse Width Modulation, it's when the vehicle flashes the input voltage to your bulbs so fast that you can't see the difference, but it modulates the activity of the halogen bulb. That's fine on an old-style halogen/incandescent, but on HID systems it might make a flashing or strobing effect, or not work at all. The proprietary technology used in the GTR Lighting GEN 5 Smart System HID ballast integrates with all PWM and CANBUS vehicles for optimal functionality.
CANBUS Integration: The key component of all HID ballasts is the controller used to manage all functions including ignition, protection, and constant use. Whatever type of controller is used is what dictates the quality level of the ballast. There are two kinds of controllers used inside HID ballasts: 1. CPU Controller -or- 2. ASIC Controller. A standard CPU controller is the most common construction type for aftermarket ballasts because it is simple, common, and cheap to produce. It requires very little quality control or strict design to function, therefore it's easy for ballast makers to create low quality CPU controlHID products. It isn't very hard and it is very cheap to build. They work OK when made with high-quality components but this is not often the case. A CPU controller lacks the ability to monitor the HID lamp (as the lamp power-decay changes over time) so it can cause short lifespan from overpowering, or low light output from underpowering. Generally speaking, the defect rate of a CPU Controller based ballast is high, and the lifespan is shorter.
An ASIC controller: like what's used in the GTR Lighting GEN 4 ballast is what you'll find in an OEM ballast for intelligent bulb control. The ASIC-based ballast technology is sophisticated, complex and intuitive. The Hylux ASIC technology will react to the bulb response to power and increase or decrease output to keep the bulb running bright for the longest possible time. ASIC technology also allows the ballast to have a higher level of CANBUS integration for vehicles that use PWM control or adaptive lighting. It's not a 100% fix for every vehicle, but the technology is designed to be the most flexible and work with the most applications easier. HID ballasts that use Hylux ASIC technology are also more expensive to make because the components required to build this system are high quality - you can not make a cheap ASIC ballast, therefore everything about a Hylux ballast is better: Faster warmup time, less ignition noise, brighter stable operating light, less flicker-fluctuation and a longer lifespan. Simply put, the GTR Lighting HID ballasts with GEN 4 Hylux technology are the best aftermarket ballast available.
GTR Lighting HID Bulbs 9012: Power Input Wattage: 55w. The color rating listed on these bulbs is for 35w ballasts. If you use a 55w ballast, decrease the color rating by 1 full step. Our bulbs work with 35w and 55w bulbs but the color will not be the same. We use ultra-high quality 100% Quartz glass to construct the main bulb component. The glass houses an OEM-grade xenon capsule using high-quality halide salts from our materials supplier. Our bulbs use an OEM-inspired mounting and alignment system to keep the bulb perfectly centered where it needs to be - this is probably the most important aspect of why GTR Lighting bulbs are the best of the best. If your bulb is misaligned at all it will cause dim light output, shadows and poor beam patterns.
Compatibility: If your vehicle uses a CANBUS system to control and/or monitor the bulbs or if your vehicle uses a PWM system to control the bulbs, this GEN 5 ballast kit will be your best bet at perfect, plug and play operation. Nothing is guaranteed to work all the time because vehicle manufacturers are constantly updating the technology they use to operate and monitor the different lighting systems, but so far this new GEN 5 PWM/CANBUS ballast has integrated perfectly with everything we've tested it on, including Ram trucks, Mercedes cars, Chrylser cars, GMC trucks, and new Ford trucks.
This HID kit: uses single beam HID bulbs with a built-in adapter wiring harness. Single beam are the type of headlight or fog light bulbs that have 1 filament per bulb. If your car or truck has 2 light bulbs per headlight housing and one does low beam, the other does high beam - you've got single beam bulbs! Same goes for fog lights, nobody has ever built a car or truck with a dual beam fog light bulb...
NOTE ABOUT PROJECTORS: Some projector-based headlights use a single beam inside the projector and use an external actuator to control a shutter inside the housing to create a high beam/low beam effect, all the while using a single beam bulb... That means it's possible to have a single beam bulb control both high and low beam but only in SOME projector headlight applications. (e.g. Dodge Ram uses a single beam bulb + a dual beam Projector. Toyota Tacoma uses a single beam bulb + a single beam projector). This kit is designed to plug into your factory headlight wiring to control the new HID bulbs and ballasts.
GTR Lighting HID bulbs: are designed to be a perfect fit replacement for any respective halogen/incandescent headlight or fog light bulb. We support the most common bulb types and some uncommon ones too! GTR Lighting HID bulbs are precisely engineered to work the best, brightest, and have the longest life when used in conjunction with GTR Lighting HID ballasts, but they can also be used with most aftermarket HID ballasts. If you're unsure of which HID bulb style you need, please email us for assistance.
HR Tested: Here at Headlight Revolution, we've spent the time to install and test all HR Tested products, so we know it'll work exactly as shown and right out of the box! Not only that, but we don't favor one particular brand. We just deliver the best product for the application, period. Be sure to reference our install videos for helpful tips on making the installation process quick, painless, and clear. HR Tested: We ensure fitment and function. You do the install. For other compatible upgrades, use the Buyers Guide on our homepage!
BULBS: 2x (One Pair)
BALLASTS: 2x (One Pair)
Wiring: 1x Harness
Warranty:Lifetime Limited (Click for Details)
Jeep Cherokee: 2014-2018
Housings: Designed for, and confirmed to fit, Stock Housings
Power Input Voltage: 9-16V DC
Output Power: 35W or 55W
Input Current: 4.4A @ Startup @ 14V DC
Ignition Voltage: 23KV
Operating Temperature: -40C to +85C
Lifespan: 2, 500 Hours
Ballast Dimensions: 3.5in x 2.75in x 0.5in
Cord Length: 13in
Wiring Input: Universal Female Socket (9006 Bulb Style/ P22D base)
Wiring Output: Universal AMP style, 1 male, 1 female
Excellent headlight option
Installation was a breeze. 1st off though I want to mention that my 2016 Jeep Cherokee had no need for the 2015+ Mopar harness. The 35w kit hooked right up the the factory wiring harness.
The 5k color was an easy to adjust to. The massive light increase did cause me to make a small adjustment to the headlight aim as drivers fequently got aggravated by the glare. I have run these lights 6+ hours a night 6 days a week for roughly 5 months and have no had no problems.
These are a great investment for anyone who does frequent night driving and I highly recommend this HID kit.
I ordered the HID upgrade kit for my 2016 Cherokee. It arrived to my home fast. I was fairly easy to install and the YouTube video Headlight Revolution made was helpful. On my Jeep, the passenger side was a bit more difficult because of a plastic air tube which was not shown in the video. That didn't stop it from being an easy install though. They are very bright, which helps my old eyes up here in Maine. Don't want any run-ins with the local wildlife!
Upon getting my order the
Upon getting my order the boxes where already opened, bolt missing on one side. Also ordered 5000K, after installing them, they were BLUE! Not what I ordered .Looks like I'm stuck with it now. That being said, they are pretty nice/ bright.
HID light and 55W Ballast
Great clear light, never regret buying it. Now im not scared to drive in the dark.
Tried and sent back other brands. Caused problems or didnÃÃ´t work. The ones from Headlight Revolution were perfect and took an hour to install. They have worked perfectly. Highly recommend!!!
Wow what a difference!
It was worth the price to get a kit that included all the parts needed to install without error codes in this Jeep with a finicky computer! The light output of these bulbs are a night and day difference compared to stock!
Deer Lake Automotive Limited
Headlights are awesome, Customer is so pleased with them.
Night and day difference over the factory headlights - much safer at highway speed at night now. Passenger side is more difficult to get at than driver side on the install - took about 2 hours - did jackup car and remove front tires for room to work and it was still tight.
Halogen to LED to HID
I initially upgraded the headlights on my 2014 Cherokee Trailhawk to Diode Dynamics SL1 LEDs. The difference was night and day over the stock halogens. Now I have upgraded from the LEDs to this 35W HID kit, and the boost in light is like when I initially upgraded from halogen!
Regarding installation, the video guide mentioned using a 7/8" KO to make a hole in the dust cover and then to de-pin the connector to fit it through. The connector is now different from what was in the video, and it is not possible to de-pin the connector. You will need to use your KO to shave a bit off the sides of the circular hole and create a slight oblong. The connector should fit through perfectly and the silicone grommet seals perfectly too.
Overall impressed with the light output, colour, and beam pattern. Installation was a cinch.