White DRL Bi-LED Headlights

Toyota 4Runner (14-21): XB LED Headlights


PART #: 1 x LF531.2-ASM

Save up to $600 with Greenbacks for Givebacks

[ In Stock: 0 pieces ]

Product Details

No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.

Compatible: With many modern applications from Chevrolet, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.

Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.

Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.

Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!

HR Tested: Here at Headlight Revolution, we spend a lot of time installing and testing the products you'll find for sale. We don't favor any particular brand, so our commitment to you is that we'll deliver the best product for your application, period. To see all of the compatible lighting upgrades for your vehicle, use the Buyer's Guide on our homepage! Be sure to check out the HR YouTube channel for hundreds of helpful install and review videos!

Product Specs

  • Compatibility

  • Toyota 4Runner: 2014+ (Note: 2021+ Models require optional adapters (be sure to select either Limited/TRD or Non)

  • Note about DRL Tap: Some 2020+ models cycle the injector circuit on without the vehicle in use. In these instances, the DRL of the XB LED headlights will come on/off randomly.

  • Replaces Toyota Part #: 81170-35571, 81130-35541, 8117035571, 8113035541

  • Compliance: DOT, SAE, FMVSS108 STANDARDS

  • NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.

  • Tech Specs

  • Traffic Pattern: LHD Only

  • Input: Toyota Multi-Pin OEM

  • Functions: DRL (White), Turn, Parking, Low, High

  • Bezel Color: Gloss Black

  • Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)

  • Optic: Kuria Optic Bi-LED

  • UV Coating: Momentive UVHC3000

Product Reviews

4.6 out of 5 stars

28 Reviews   Write a Review

5 out of 5 stars


Jaime Abbott

These are a no briner, do not waste your time on other crap.

5 out of 5 stars

Look at me know

Christopher Arevalo

I was impressed with the easy install instructions and quality of lights. They definitely are worth every penny. I was hesitant to change out a perfect set of headlights but I'm so glad I did.

2 out of 5 stars

I Really Wanted to Love These...

Danny Ha

In short, the headlights are beautiful and bright. The look/design is amazing BUT they're just not worth $1100. Why? Fitment is ok at best and for the price you pay, I expected a straight, even beam pattern. The cut-off is crisp and definitive but I spent an hour adjusting them and they simply would not line up evenly. Save yourself some big bucks and go with the Morimoto 2Stroke 2.0 LEDs. Same light output but a fraction of the price.

Full review: Like the title states, I really wanted to love these headlights. I had been researching them for over a year now and was extremely disappointed when I missed out on the Black Friday price of $975 from another vendor. So when I saw HR was giving a 10% discount for Labor Day, I knew I had to jump on them. So I took the plunge and ponied up the $1100 (after taxes) for them.

Fast forward a few days and my face lit up like a kid on Christmas when they arrived. I even left work early after I received a text notification that they had arrived (Don't tell my boss). I got home and first bad sign was that the box was completely mangled. Like it had just gotten into a fight with Mike Tyson in his prime, but thankfully, Morimoto had the headlights well packaged and protected. After fully inspected them and verified they were still good, I went to work on installing them.

After removing all the necessary parts on my 4Runner, the first thing I see is that the fitment is not that great. Yes, they're aftermarket lights so I understood and expected them to not fit like the OEM headlights but for $1100, you'd think enough R&D would've gone into these to ensure that fitment was exactly like the OEM lights, if not, damn near close. But they weren't. They fit like 80% but that's not what you're expecting when you spend this kind of cash. The main issue with mine is that the tops of the headlights do not sit flush with the hood so there's a noticeable gap between them. This is after I pushed up on them and secure the bolts. Now, it could just be the set I received but I'm not sure as I don't have another set to compare them too. From all the other videos, reviews, and installations I've watched, they all seem to have this gap. I just didn't notice it until now. My concern with this is the amount of water that can possibly seep underneath the hood has now increased because of this gap. My semi-solution is to purchase some window weather stripping foam from Home Depot and stick a thin piece underneath the hood to prevent this.

After plugging everything up, the moment of truth was upon. My shining moment I had been waiting for ended anti-climatically. I thought I'd be able to light up my entire neighborhood when I flipped these on but they didn't. Reason for this is because I previously had the Morimoto 2Stroke 2.0 LEDs in my OEM headlights so going from those to these headlights was a bit of a letdown since the light output was basically the same. With that being said, if you're going from your STOCK halogens to these, you're going to be AMAZED by the difference in brightness and overall badass-ness. My letdown was because I expected the XB headlights to be even brighter than the LED bulbs but I was wrong.

Nonetheless, the difference maker for me was the design of these headlights. First off, the black housing of these are just on a whole another level and they really complement and complete the look my of TRD Pro (still now sure why Toyota opted to keep chrome housing headlights/taillights on these when everything else is blacked out). Second, the 3 individual projectors within the headlights are SECOND TO NONE! They just ooze with a bold sleekness and distinction that separates you from every other 4Runner out there. Third, the Daytime Running Lights aka DRLs are magnificent. They honestly should have come with something similar from the factory but this just completes the look of the SUV. It also makes it look like something from this decade as it should. If you're a Toyota fan, they're the most dependable vehicles out there but they have always lacked in the technology department. They're like the Apple of car manufacturers. With that being said, I am still in awe with the look of these. And lastly, the sequential turn signals on these will make you speechless. Seeing these in action is like seeing a leprechaun riding a unicorn at the end of a rainbow with a pot of gold. They almost make you forget how much you spent on them for a short time with how amazing they look.

Unfortunately, all great things must come to an end. After bolting and buttoning everything back up, it came time to adjusting and leveling the beam pattern. As mentioned at the beginning, the cut-off line is clean and crisp. The issue for me is that they don't line up 100% even. Now, I'm no lighting expert, but the beam pattern just looked jagged and no where near as good as the OEM lights. And when you fork up the type of money you do for something like this, you expect the best. I spent an ample amount of time trying to see if they would line up straight and they would not. This to me is where the headlights fall super short of expectations.

In conclusion, I can't recommend these headlights for what I consider to be major flaws in the fitment and light pattern. If all you care about is how it makes your 4Runner look then consider it money well spent. For me, the price even with the discount I got does not justify the product. If it weren't for me opening the box and probably getting charged a restocking fee, I probably would have returned them. My recommendation is just go with the Morimoto 2Stroke 2.0 LEDs in your stock headlights. They're a little noisier but light output is the same and a fraction of the cost of these headlights. You'll feel better and probably not as constipated knowing you spent a lot less because these headlights are better quality than eBay ones but not worth anymore than $500 in my opinion.

5 out of 5 stars


Jose Pompa

Bought it for my 2020 PRO
Installed in 1 hour
Simple tools

Did have to cut a hole in the fuse box for the cable which a box cutter did the trick

Expensive but worth it

5 out of 5 stars

Morimoto Headlights - 4runner

Edmund Lopez

Best investment I've made for my 2018 4Runner!! ...I'm getting quite a bit of compliments from other 4runner owners. They look really sharp!!
Great Product guys!!

5 out of 5 stars

Less than 1 hour

Allen Tillett

Easy to install. Superior light to OEM

5 out of 5 stars

incredible head light conversion

Jeff Pattek

excellent product - easy install

5 out of 5 stars

Morimoto on 4Runner

Leslie Ann De Guzman

Ordered after hours & the product was shipped the following morning. Got free shipping & surprised my order came within a week to Hawaii. It was well packaged & no regrets ordering from Headlight Revolution

5 out of 5 stars

Simply Amazing Headlights

Greg Bordash

Purchased the Morimoto XB headlights for my 4Runner back in early Dec, it took some time to get but well worth the wait. Everything you have heard or seen is Absolutely TRUE. These headlights are INCREDIBLE, cannot believe I was able to drive with the stock ones before. Was debating on just replacing the stock bulbs to LED, glad I went all in and upgraded the complete headlight... NOW I CAN SEE THE LIGHT.
Thanks HR, awesome advice and service.

5 out of 5 stars

2916 4Runner Morimoto headlights

Evan DeCoster

Ordered the morimoto xb headlights and couldn't be more impressed. Headlight Revolution shipped them out fast, there install video was spot on as I don't have any experience with working on trucks. The quality was worth every penny. I had high expectations after watching videos and completing my research. This product has exceeded all expectations so far. Light out put is exponentially better than oem. The laser lines they produce is just as advertised. I'd highly recommend.