HR Tested Fit and Function

2014-2021 Toyota Tundra LED Brake Light Bulbs

B-HRT-0146-HR

PART #: 2 x GTR.LED581


[ In Stock: 0 pieces ]

Product Details

2014-2021 Toyota Tundra LED Brake Light Bulbs: One of the most important lights to upgrade are the brake lights in your taillights. The GTR Lighting LED bulbs are the brightest option we’ve tested for the 14+ Tundra and they are totally plug and play as you can see in our new video. This upgrade keeps you and others around you save because these Carbide Series LED bulbs are way brighter than your stock bulbs which forces other people to pay attention and see that you are slowing down. They are bright in parking mode and even brighter when the brake is applied. The taillight is held on by two screws, and then the LED bulb is a plug and play replacement for your old bulbs. The install couldn’t be easier!

As part of our Tundra Video Series: we showed viewers how to install LED rear red blinker light bulbs on their 2014-2021 Toyota Tundra. We supply only the highest quality LED bulbs from GTR Lighting so you won't have any headaches and they will last a long time.

You can't use just any LED bulbs: to plug into the rear parking light / turn signal position on the Tundra - these need to be specially designed to work with the Tundra wiring! We have the right bulbs!

This kit comes with everything you need to do the install: and just watch the video to see how it's done!

These LED bulbs: will replace any T20 based 3156/3157 series bulb, here is the bulb cross reference guide for this product: 3057, 3157, 3457, 4057, 4157 & T20

The Carbide Series LED replacement bulbs from GTR Lighting: were originally designed to be the brightest option in the world and today with the version 2.0 they're even brighter! Because these bulbs are the brightest option available today you will experience greater safety from a brighter light, better performance through built-in CANBUS integration, and better style with the beautiful colors created by the custom built LED chips!

Not just the brightest: but also the easiest! In the past you had to wire in resistors to your turn signal bulb circuits in order to trick the computer into thinking that your LED bulbs were the same thing as your old dim bulbs. Not anymore! The new Carbide Series 2.0 bulbs have a built-in CANBUS-integration circuit that works with 95% of all cars, trucks, and motorcycles on the road today! Gone are the days of wiring in resistors, or replacing flasher modules. These new LED bulbs are truly plug and play, and one of the brightest and most reliable options around.

ITCS - Intelligent Temperature Control System: The Carbide Series 2.0 CANBUS LED bulbs have a unique physical design as well as a temperature controlled thermister circuit to protect the bulbs from overheating. The aluminum case of the bulbs is larger than others in order to accommodate the extra heat given off by these bulbs. There are strategically placed vents and heat sink fins at the top of every bulb to maximize passive cooling.

NOTES: Please take these things in consideration before using these next-gen LED bulb upgrades: Some vehicle still need to use a traditional type of LED bulb and a resistor for turn signal applications - there are thousands of different applications and the technology does not exist yet to make a product that works for every single vehicle on the road.

For example,: these vehicles do not work without resistors, they still require the traditional type of LED bulbs, like Armor Series, paired with a resistor for turn signal applications: 2012-2017 Toyota Camry, 2015 Dodge Ram, 2018-2019 Subaru Crosstrek.

The following vehicles work: without resistors when using the Carbide Series 2.0 LED bulbs. These are confirmed to work without resistors for turn signals, no rapid flashing problems, no hyper flash, and no bulb out errors: 2018 Dodge Durango, 2019 Jeep Wrangler, 2018 Toyota 4Runner, 2019 Ram 1500.

These bulbs: are polarity specific. If they do not turn on, please try flipping it around in the socket and try again. If the bulbs stop working it means they got too hot and the protection circuit shut down. Please try to cool them down for 2 minutes and try again to troubleshoot the problem. These bulbs have a 1-year No Questions Asked warranty.

Constant Current Driver: The Carbide Series 2.0 LED bulbs from GTR Lighting are built using a state of the art Constant Current Driver inside the bulb with built-in CANBUS function for most monitoring systems. This allows them to be more reliable when used on vehicles that have voltage fluctuations due to electrical system design or fault. A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage/current reaches the LED. This helps the LED bulb last longer than bulbs that don't have this device built in. 2,400 raw lumen light output per pair of bulbs making these bulbs the brightest option in the world! Features maximum CANBUS support - simulation of the full load 24W bulbs commonly found in turn signals. No errors in cars or trucks 95% of the time.

HR Tested: Here at Headlight Revolution, we've spent the time to install and test all HR Tested products, so we know it'll work exactly as shown and right out of the box! Not only that, but we don't favor one particular brand. We just deliver the best product for the application, period. Be sure to reference our install videos for helpful tips on making the installation process quick, painless, and clear. HR Tested: We ensure fitment and function. You do the install. For other compatible upgrades, use the Buyers Guide on our homepage!

Product Specs

  • Compatibility

  • Toyota Tundra: 2014-2021

  • Housings: Designed for, and confirmed to fit, Stock Housings

  • Tech Specs

  • Light Source: 16x Samsung 2835

  • LENGTH: 2.06in / 52.3mm

  • DIAMETER: 0.84in /21.3mm

  • Power: 0.8w (dim) / 4.7w (bright)

  • Current: 57mA (dim) / 334mA (bright)

  • RAW LUMENS: 750lm

  • EFFECTIVE LUMENS: 600lm

Product Reviews

4.7 out of 5 stars

42 Reviews   Write a Review

5 out of 5 stars

Perfect

Michael Lennon

Easy install and way brighter than stock.


5 out of 5 stars

Best LEDs

Addrian Reyes

Looking forward to getting the front bar light


5 out of 5 stars

Bright

George Schlomas

Big improvement over stock bulbs


4 out of 5 stars

Rear LED Brake Light

Benjamin Ross

Extremely bright light. I'm very happy with the lights.


5 out of 5 stars

LED tailights

1962

Awesome. Great upgrade from factory. Easy one minute to install.


5 out of 5 stars

Huge difference

Bud Ketterl

Much brighter, better looking! Headlight Revolution has everything I need!


3 out of 5 stars

Bright bulb but...

Todd Nordmeyer

The resistors that were provided needed to be re-wired, the installation split near connector and wires are only 6Äù long, not 12Äù as scene in installation video. Luckily I have experience with electrical wiring...


5 out of 5 stars

Installed this kit and it

Jeffery Boyd

Installed this kit and it is a lot brighter than factory. In my opinion these are the best out there.


5 out of 5 stars

Great upgrade

Michael Best

Nice build quality and really bright.


5 out of 5 stars

Great LEDÄôs

Benchmark Finishing Inc.

I love these, so much better than stock bulbs. Worth the splurge for sure. Rock on!