HR Tested Fit and Function
2019+ Jeep Gladiator (JT) XTR LP LED Reverse Light Bar for License PlateB-HRT-0359-HR
[ In Stock: 0 pieces ]
Starting at $X.XX/month with
2019+ Jeep Gladiator JT LED Reverse Light Kit: Looking for upgraded Reverse Lighting from a reputable brand and value the fact that we've actually tested them on your truck? Our HR Tested kits include all the right components to ensure perfect fit, function, and performance from the upgrade. At Headlight Revolution, we do 2019+ Jeep Gladiator LED lighting upgrades better!
If your headlights: are great you probably need better lighting in reverse too! Did you know the backup lights on cars and trucks isn't designed for you, the driver, to see better in reverse? They were first put on cars to show other people around you that you're about to back up! Well, now you get the best of both worlds! You can show the world to move out the way, AND see almost as good in reverse as you can when in drive!
This kit: comes with a single Xenon Depot XTR LP which mounts to your license plate and wires to your 7-pin trailer connector or tail light. Professional install recommended, but if you're handy you can probably install it yourself in less than an hour with basic hand tools. Make sure you watch the video for install tips and tricks.
Back it Up: Up front we've already got bright low beams, high beams, and fog lights, but too often overlooked is our ability to see well while backing up in the dark. While there are plenty of LED bulb upgrades out there for stock reverse lights; when it comes to a backup light boost there's simply no comparison to the XTR LP.
Engineered: The XTR LP is the only system on the market that leverages optical refinement over raw power to produce the perfect reverse light beam pattern. We started by understanding the most typical installation angles and then optimized the lens to distribute the most possible light in the most effective pattern. To pack a real punch, the XTR LP packs more than just a lot of LED's into a line on the back of car. It's a fully engineered product.
A driver: produces 29.9W of maximum power pumps out 2700 raw lumens that's translated into 1950 real lumens after transmission through the optical lens.
Technically Speaking: At a 10-degree mounting angle, the vertical range is -20 to +25 degrees. At the most typical 0-degree mounting angle, the XTR LP provides a -30 to +15 degree vertical spread, which easily exceeds the illumination range of any standard backup for spread. Users should acknowledge that this product far exceeds the legal limit for output volume in a reverse light application.
Bolt-On: The XTR LP will bolt onto your vehicle's top two license plate mounts. Its die-cast aluminum housing is contoured according to the geometry of US-spec license plates for a flush fit, and the mounting points are positioned according to the same universal standard. The system is finished in a satin black powder coat.
Wiring: The XTR LP is powered on with a simple +/- 12v circuit that's intended to tap in to your stock reverse light wiring. The system includes 1.5 meters of integrated wiring that can be trimmed back according to your application, a quick-disconnect for ease of install, and an integrated rubber grommet to keep moisture and dust out of a pass-through hole if necessary.
HR Tested: Here at Headlight Revolution, we've spent the time to install and test all HR Tested products, so we know it'll work exactly as shown and right out of the box! Not only that, but we don't favor one particular brand. We just deliver the best product for the application, period. Be sure to reference our install videos for helpful tips on making the installation process quick, painless, and clear. HR Tested: We ensure fitment and function. You do the install. For other compatible upgrades, use the Buyers Guide on our homepage!
1x: XTR LP LED Reverse Light
1x: Power Tap Kit
Warranty:5 Years (Click for Details)
Jeep Gladiator JT: 2019+
Housings: Designed for, and confirmed to fit, Stock Housings
LED SPEC: 54X CREE J Series (2835)
COLOR RATING: 80CRI / 4500K (warm white)
DRIVER SPECS: 54X 3.05V x 180mA = 29.W max
RAW OUTPUT: 2700 lumens
REAL OUTPUT: 1950 lumens
0 DEGREE MOUNT: -30 to +15 degree vertical range
10 DEGREE MOUNT: -25 to +25 degree vertical range
this purchase was a gift
this purchase was a gift for my son and he installed it easily and loves it. because of all the off roading he couldnt use lights attached under his bumper so this is perfect
Easy Install on my Gladiator and graet light output.