Ballast Output Adapters
AMP to D2S Ballast Adapters (90deg)B-ACC-AMPD2S90-HR
[ In Stock: 0 pieces ]
Starting at $X.XX/month with
Reuse Your Ballasts: These will save you some money and allow the use of D2S bulbs with your aftermarket HID ballasts. Works with 99% of aftermarket HID kit ballasts that have "AMP" outputs. Please confirm compatibility by checking the product pictures if unsure.
Industry Standard: These are built to industry standard specifications for AMP male/female high-voltage outputs, and "D2S" bulbs. They should work with all OEM and aftermarket ballasts and bulbs.
Added Length: Another benefit of using these that many don't realize is that they instantly add length to the output on your ballast - giving you a bit more freedom to choose where things are mounted. We'll take it!
Well-made: These are properly insulated from top to bottom to shield the high-voltage that HID ballasts produced. Thick rubber insulation prevents wires from getting nicked, and voltage from leaking out. Don't want any of that business around here!
In Comparison: There are a lot of these read-headed AMP>D2S adapters on the market, you can find something seemingly the same on eBay or Amazon for probably a couple bucks less (we know, because we used to carry the cheaper ones too) - but take it from us, its not worth it. They may cause bulb ignition reliability problems, or even worse, fry the base of your bulbs from poor tolerances. Though still inexpensive, our adapters are top quality!
HR Tested: Here at Headlight Revolution, we spend a lot of time installing and testing the products you'll find for sale. We don't favor any particular brand, so our commitment to you is that we'll deliver the best product for your application, period. To see all of the compatible lighting upgrades for your vehicle, use the Buyer's Guide on our homepage! Be sure to check out the HR YouTube channel for hundreds of helpful install and review videos!
BALLAST ADAPTERS: 2x 90-degree AMP to D2S
WARRANTY: 2 Years
BULBS: D2S or D2R Only
BALLASTS: All with 'AMP' outputs
LENGTH: 250mm / 10.0in
D2S HEAD DEPTH: 30mm / 1.2in
INPUT: 1x Male AMP and 1x Female AMP
OUTPUT: P32-D (D2S / D2R)