• Home
  • /
  • Ferrari (95-04) XB LED Tail Lights

Ferrari (95-04) XB LED Tail Lights

1 Review

Brand: Morimoto




PART #: 1 x LF355

*Guaranteed Fitment
Easy Return


Introducing Morimoto's Ferrari LED Tail Lights, the perfect upgrade for classic Ferrari owners. These tail lights are a direct bolt-on fitment for models like the F355, 550, 575, 360, and F50 from the 90s and early 2000s. Designed for easy installation, they plug into the factory connectors without any modifications. Inspired by the Ferrari 488, these tail lights enhance the car's rear end with their red outer lens, smoked central lens, and textured inner optics. They provide multiple functions, including low-intensity parking lights, high-intensity brake lights (red), turn signals, hazard lights (amber), and high-intensity reverse lights (white). Built to last, Morimoto's tail lights feature a UV-treated polycarbonate lens and an injection-molded ABS housing, ensuring durability and longevity. They surpass OEM Ferrari quality and are a worthy investment for classic car enthusiasts. Please note that these tail lights are designed for US-Spec vehicles, and compatibility with vehicles from other countries may vary.


  • Enhanced Compatibility: Fits Ferrari models like F355, 550, 575, 360, and F50.
  • Effortless Installation: Easy direct bolt-on fitment with stock mounting points.
  • Modern Design: Stylish look inspired by the Ferrari 488.
  • Multi-Functional Lighting: Offers parking/brake (red), turn/hazard (amber), and reverse (white) lights.
  • Durable Build: UV-treated polycarbonate lenses, sturdy ABS housing for long-lasting use.


  • Tail Lights: 4x (One Set) 95-04 Ferrari XB LED Tail Lights

  • Wiring: Plug and Play Splitter Harness


This Morimoto product includes a 5 Year limited warranty, serviced and supported by the Morimoto team in Atlanta, GA. This warranty does not cover modifications, alterations, or misuse. For additional information, Click Here.


  • Input: Ferrari 5-Pin OEM

  • Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)

  • Light Source: SSC LED

  • Brake Light: Red (Bright)

  • Parking Light: Red (Dim)

  • Turn Signal: Amber



  • Ferrari F355: 1995-1998

  • Ferrari 360: 2000-2004

  • Ferrari 550 Berlinetta: 1996-2002

  • Ferrari 575 Berlinetta: 2002-2006

  • Ferrari F50: 1995-1997

  • Ferrari Part Numbers: 157522, 157123

  • NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.


DOT, SAE, FMVSS108 Standards



Classic Ferrari: There is nothing that looks better. Nothing that sounds better. Nothing with more character... than a classic Ferrari. Everything about these cars is the pinnacle of perfection for analog-enthusiasts, and we wouldn't change a thing. Well, except for the taillights, that are melted, faded, cracked, and based on incandescent bulbs from the 80s. As long as the rear-end of your Ferrari is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right?

Compatible: With the Ferrari F355, the 550, the 575, the 360, and the F50, these are a direct bolt-on fitment for many beloved Ferraris from the mid-late 90s and early 2000s. They use all of the stock mounting points, and should not take more than an hour or two to install all four tail lights.

Plug n Play: The Ferrari LED tail lights from Morimoto are designed to work without any modifications. These tail lights will plug into the factory connectors for the stock lights. Each set includes signal splitters too, which will allow the pair of lights on each side of the car to work in unison (rather than one acting as the turn signal, the other as the brake, etc). If you prefer to leave the setup as-is from the factory, you don't need to use the splitter.

Style: Inspired by the design of the tail lights on the Ferrari 488, these are the perfect solution to modernize the rear end of your 355, 550, 575, 360, or F50 without compromising the work of Pininfarina. They look natural on the car, with their red outer lens, smoked central lens, and textured inner optics. There are no visible LEDs from the outside, these could truly pass for original-equipment parts.

Functions: The optical light pipe that highlights the outside perimeter of each light acts as a low intensity parking light, and high intensity brake light (red). The middle section acts as the turn signal and hazard light (amber). The center of each light is a high-intensity reverse light (white).

Well-Built: The durable polycarbonate lens has been UV treated, and will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than cheap aftermarket tail lights, which is far from the case here. The price is justified, and as the saying goes: you pay for what you get. These tail lights are built to exceed OEM Ferrari quality and should easily last the life of your classic car.

NOTE:These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.

Be sure to check out the HR YouTube channel for hundreds of helpful install and review videos!

Ratings & Reviews

1 review

  • 4 stars
  • 0 reviews
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews

This is IT!!!


If you have a 355 and you don't have these Morimoto LED tails you really are missing out.


Definite winner


These tail lights are simply amazing. I never realized how dim the stock taillights were until I plugged these new ones in. If you're on the fence about these I say do it, you won't be disappointed.


No more melted lights


I got my 360 2nd hand and it's an awesome car but I was having issues with the OEM tail lights flickering. Long story short it was because they were starting to melt because of all of the engine bay heat. I got an insane quote from the dealer on replacements so I looked for other options online and found these.

After looking at the review video on YouTube I decided to pull the trigger. Man, I have to say these look phenomenal. I'm a big fan of the quad look of these LED tails.

Sign up for our newsletter