Vehicle-Specific LED Projector Fog Lights

Jeep (Wrangler JL): Morimoto XB LED

B-FOG-JEEPJL-HR

PART #: 1 x LF111


[ In Stock: 0 pieces ]

Product Details

No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.

Compatible: with the new Jeep Wrangler JL chassis, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.

Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.

Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.

Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!

HR Tested: Here at Headlight Revolution, we spend a lot of time installing and testing the products you'll find for sale. We don't favor any particular brand, so our commitment to you is that we'll deliver the best product for your application, period. To see all of the compatible lighting upgrades for your vehicle, use the Buyer's Guide on our homepage! Be sure to check out the HR YouTube channel for hundreds of helpful install and review videos!

Product Specs

  • What's Included

  • Fog Lights: 2x (One Pair) Morimoto XB LED Type GM Fog Lights

  • Wiring: Plug and Play Harness

  • Optional: Yellow Lamin-X Film Kit

  • Warranty:10 Years (Click for Details)

  • Compatibility

  • Jeep Wrangler JL: 2018+ w/ Plastic Bumper

  • Replaces Mopar Part #: 68298651AA

  • Compliance: DOT, ECE, SAE Standards

  • Tech Specs

  • Intensity: 1,200lm (raw; each)

  • Input: Sealed 5202 Male

  • Material: Powdercoated Aluminum (Housing), UV-Resistant Polycarbonate (Lens)

  • Optic: Kuria Fog-Projection Lens

  • Light Source: Nichia 5500K (Pure White)

  • Compliance: IP67

Product Reviews

4 out of 5 stars

3 Reviews   Write a Review

5 out of 5 stars

wow

Gerald Oduber

Installed these on my JLU sport S... super bright cutoff line is impressive...unique look.. highly recommended


5 out of 5 stars

Morimoto JL LED foglights

anonymous

These seem to be a good quality build. The installation is relatively straighforward, simply pop out the plastic retailer mounts from the factory lamp and replace. You can't really mess this up, take your time in compressing the plastic mounts and make sure they are securly clipped into the new lamp housing. The only think that is a bit strange is the pigtale that comes with the lamps-it doesn't quite lock into the factory socket as secure as the one did on the factory lamp but is seems like it should be fine. Just make sure it is pressed together all the way. The light output is dramatically different. I did one at a time at dusk and turned the fogs on with one of each. No contest these are a HUGE upgrade in light quality and quantity. Well work the money.


2 out of 5 stars

Not so easy to install

anonymous

Received the Morimoto XB LED FOG LIGHTS ordered direct from Morimoto about two days ago and was very eager to install them on our 2018 Jeep Wrangler JL Sport as the original fog lamps were severely wanting in terms of performance.

The Morimoto installation guide seemed a bit overly optimistic as it did not address how to access the fog light housing. This is not a simple bulb swap and it appears that I will have to remove the front bumper to remove the stock fog lights and install the new housings.

I did remove the covers for the fog lamps and attempted to get into the shells, but decided to see if the electrical connections would match up. They did not.

Wound up putting the front end back together and sent Morimoto a picture of their lamp connection next to the Jeep factory connection asking if they had some sort of adapter. We'll see what the response was.

This is not a reflection on Headlight Revolution. I bought this product directly from Morimoto after consulting with their people online as to the proper application.

The product seems to be well built. I just hope I am able to install it.