• Home
  • /
  • XD License Plate Reverse Light Bar

XD License Plate Reverse Light Bar

33 Reviews

Brand: XenonDepot




PART #: 1 x XD.LED400


Introducing the XTR LP, your ultimate solution for enhancing nighttime visibility while reversing your vehicle! Forget about dim and ineffective stock reverse lights. With 54 CREE J Series 2835 LEDs, rated at 4500K/80CRI, this powerhouse produces a blinding 1950 real lumens after passing through its optimized optical lens. Engineered to perfection, the XTR LP boasts a unique beam pattern, surpassing all competitors. Whether you're at a 10-degree or 0-degree mounting angle, its impressive -30 to +15-degree vertical spread outshines standard backup lights. Plus, the easy bolt-on installation means you can enjoy this illumination upgrade in no time. Don't settle for less; elevate your driving experience with the XTR LP. Its die-cast aluminum housing, satin black powder coat finish, and simple +/- 12v wiring integration make it a must-have addition to your vehicle. Upgrade to unparalleled visibility today!


  • Powerful Illumination: 54 CREE J Series LEDs produce 1950 real lumens for superior brightness.
  • Precision Engineering: Optimized lens design ensures an effective beam pattern.
  • Wide Vertical Range: Vertical spread from -30 to +15 degrees exceeds legal limits.
  • Easy Installation: Bolt-on design, die-cast aluminum housing, and integrated wiring for quick setup.
  • Moisture Protection: Integrated rubber grommet keeps out moisture and dust.


  • Reverse Light: 1x XTR LP LED Reverse Light

  • Wiring: 1x Power Tap Kit


This product includes a 5 Year limited warranty, serviced and supported by our team in Atlanta, GA. This warranty does not cover modifications, alterations, or misuse. For additional information, contact us.


  • Intensity: 2,700lm (Raw), 1,950lm (Effective)

  • Power: 29w

  • Optic: -30deg to +15deg vertical range



  • Circuits: 9-16V Electrical Systems

  • License Plates: US-Spec Plate Mounts (excl. 19+ Dodge Ram)


Back it Up: Up front we've already got bright low beams, high beams, and fog lights, but too often overlooked is our ability to see well while backing up in the dark. While there are plenty of LED bulb upgrades out there for stock reverse lights; when it comes to a backup light boost there's simply no comparison to the XTR LP.

Engineered: The XTR LP is the only system on the market that leverages optical refinement over raw power to produce the perfect reverse light beam pattern. We started by understanding the most typical installation angles and then optimized the lens to distribute the most possible light in the most effective pattern. To pack a real punch, the XTR LP packs more than just a lot of LED's into a line on the back of car. It's a fully engineered product.

What's Inside: 54 CREE J Series 2835 LEDs rated at 4500K/80CRI. 180mA driver produces 29.9W of maximum power pumps out 2700 raw lumens that's translated into 1950 real lumens after transmission through the optical lens.

Technically Speaking: At a 10-degree mounting angle, the vertical range is -20 to +25 degrees. At the most typical 0-degree mounting angle, the XTR LP provides a -30 to +15 degree vertical spread, which easily exceeds the illumination range of any standard backup for spread. Users should acknowledge that this product far exceeds the legal limit for output volume in a reverse light application.

Bolt-On: The XTR LP will bolt onto your vehicle's top two license plate mounts. Its die-cast aluminum housing is contoured according to the geometry of US-spec license plates for a flush fit, and the mounting points are positioned according to the same universal standard. The system is finished in a satin black powder coat.

Wiring:The XTR LP is powered on with a simple +/- 12v circuit that's intended to tap in to your stock reverse light wiring. The system includes 1.5 meters of integrated wiring that can be trimmed back according to your application, a quick-disconnect for ease of install, and an integrated rubber grommet to keep moisture and dust out of a pass-through hole if necessary.


Great product!


Have a new Sierra AT4 and the stock reverse lights are almost non-existent. I live in the country and you couldn't even tell when you put it in reverse at night. This light bar was recommended on an AT4 forum and I'm glad it was. Well built and easy to install. Now I can see 50' behind the truck. Well worth the purchase.


Lights up my driveway like a airport runway


I have a 2012 Ram 1500 Crew Cab. I had really been struggling to back it into my dark driveway, which is a small, rather tight space. The XTR LP REVERSE LIGHT SYSTEM washes the driveway in bright white light, even though it is small and unobtrusive.

I love this thing. The install was pretty straightforward, although I opted for splice/solder as opposed to the wiretap.

Thank you for the install video guys. It was a big help.


Light bar

by -

very bright. Looks good on truck.



by -

easy to install and very BRIGHT :sun_with_face:


Awesome product

by -

Bought this for my truck just trying to brighten things up and boy does it work great with the HR reverse lights as well. Very worth the money


Nice light

by -

Easy to install , looks good and gives out good light.


I can see!

by -

Love being able to see in reverse! Never had that opportunity with my stock back up lights, but now with the XTR License Plate LED Bar I can finally see!


XTR LP Reverse Light - Brilliant!

by -

Easy install and really bright. Install the 1000Lm backup LEDs as well and could not be happier. 2019 Tundra.


Difficult Install for 4Runner

by -

Bought this for a 5th Gen 4Runner.
It's not a simple install; I would categorize it as 'nightmare' install since you have to take too many things apart to wire internally.



by -

I love it

Sign up for our newsletter